Permobil M300 Corpus HD, Service Manual

Page: 44 / 112

44
Lights
Lights
Removing the rear lights & indicators
The rear lights and indicators are delivered complete
with the chassis rear cover.
1. Switch off the main power switch on the
control panel.
2. If the upper chassis cover isn’t removed,
remove it’s rear knobs and lift it’s rear end to
release the rear chassis cover, raise the seat
if needed. Remove the rear chassis cover
by lifting it upwards/backwards, be sure to
disengage the tab.
.
3. Disconnect the rear lights and indicators
cabling (see fig.). These are connected to
the connectors at the rear of the wheelchairs
chassis (see fig.).
Assembly
Assemble in the reverse order.
1. Reconnect the rear lights cabling (see fig.).
2. Fit the cover partially inside the chassis at the
lower edge (see fig. above).
3. Make sure the upper cover holds the rear cover
and Remount the two knobs (see fig. above).
Rear lights cabling connections.
The rear cover is fitted with the
upper chassis cover.
1. Left Indicator
2. Right Indicator
3. Left Rear Light
4. Right Rear Light
1 2
4 3