![background image](http://html.mh-extra.com/html/permobil/m300-corpus-hd/m300-corpus-hd_service-manual_1531335031.webp)
31
Electric Seat lift/
Fixed Seat Tube
Assembly
Assemble in the’reverse order.
1.
Fit the Electric seat lift/Fixed seat post into the
chassis using the four screws (see fig. below).
See page 36.
2. Electric seat lift on wheelchair with VR2
Connect the seat lift cabling at the connector
on the cabling.
Electric seat lift on wheelchair with R-net
Connect the seat lift cabling to the ICS general
module.
3.
Fit the seat including the seat tilt mechanism if
the wheelchair is equipped with such device.
See page 36-40.
Electric seat lift/Fixed Seat Tube
4.
Fit the upper chassis cover. See page 9.
ICS General Module is fitted at
the rear of the chassis.
For this task the following tools are necessary:
1 Allen key 5 mm.
The seat is heavy. This work should therefore
always be performed by two people. Be careful
with the cabling.
m
WARNING!
The Fixed Seat Tube/Electric Seat Lift is attached with four screws.
ICS General Module.
Summary of Contents for M300 Corpus HD
