Permobil C400, Service Manual

Page: 96 / 132

Permobil C400 Corpus 3G Lowrider Adjustments
Seat height — Fixed seat post
Figure 148. 1. Locking screw. 2. Height adjustment screw
in its groove.
For this task the following tools are necessary:
• 1 Allen key 6 mm.
• 1 Allen key 8 mm.
Adjusting the seat height
The length of the fixed seat post can be adjusted to five
different fixed positions.
1. Switch off the main power switch on the control
panel.
2. Loosen the screw (1) that locks the fixed height posi-
tion of the seat post. See fig. 148.
3. Raise the seat using the Seat lift crank supplied.
4.
Figure 149. The length of the fixed seat post can be ad-
justed to five different fixed positions.
Screw the height adjustment screw in place in the de-
sired height position. See fig. 149
Figure 150. Adjusting the Seat Height using the Seat lift
crank.
Lower the seat using the Seat lift crank supplied. Turn
the seat so that the height adjustment screw ends up
in its groove. See fig. 148.
L
CAUTION!
After adjusting, make sure the height adjustment
screw ends up in its groove.
On early models of the chassis, the fixed seat tube
has only four positions.
96