Permobil C400, Service Manual

Page: 90 / 132

Permobil C400 Corpus 3G Lowrider Repairs
Mounting
1.
Figure 138. The legrest is held in place by two screws
and spacers. The front bracket of the actuator is held in
place by a screw and lock nut.
Mount the legrest using the two screws and spacers.
See fig. 138. Use a torque wrench to tighten the
screws.
Tightening torque 24 Nm.
2. Mount the front bracket of the manual adjustment
unit/actuator. See fig. 138. Start with the screw and
washer. Tighten the screw using a torque wrench.
Tightening torque 47 Nm. Then fit the lock nut and
washer on the inside of the bracket.
3.
Figure 139. Remount the front ends of the UniTrack rails.
Mount the front ends of the UniTrack rails, they are at-
tached with a screw from underneath. See fig. 140.
4.
Figure 140. Mount the legrest's top cover by carefully
pressing its bracket into place on the legrest's fixing
screws/spacers.
Mount the legrest's top cover by carefully pressing its
bracket into place on the legrest's fixing screws/
spacers. See fig. 140.
90