Permobil C400, Service Manual

Page: 35 / 132

Permobil C400 Corpus 3G Lowrider Repairs
Magnetic wheel lock
Removal
For this task the following tools are necessary:
• 1 Allen key 3 mm.
1.
Figure 37. The electrical connections of the magnetic
wheel locks are positioned on the inside of the chassis,
on each side of the seat lift/seat post.
Raise the seat to the highest position. If the chassis is
equipped with fixed seat post, see
Seat height —
Fixed seat post , Page 96. If the seat lift does not work
normally because the batteries are discharged or the
actuator is defective, the seat can be raised/lowered
manually, see
Manual operation of Electric Seat lift ,
Page 41.
2.
Figure 38. Electrical connection of the magnetic wheel
locks.
Switch off the main power switch on the control
panel.
3. Put the circuit breaker in the "OFF" position. It is ac-
cessed through a hole in the chassis cover. See 78
Circuit breaker/Battery isolator. , Page 54.
4. Remove the seat lift cover, chassis cover and the
front fender on the side in question, see
Covers ,
Page 14.
5. Disconnect the electrical connection (1) of the mag-
netic wheel lock. The connections are positioned on
the inside of the chassis, on each side of the seat lift/
seat post. See fig. 37.
35