background image

perma STAR CONTROL TIME

- 3 -

 

 

▪ 

is only to be used for operating conditions recommended in this operating  

   

 

manual. 

        

 

 

▪ 

is only to be used with settings and variations recommended by this 

 

 

 

operating manual.

 

Any other usage, setting and variation is considered to be inappropriate. 

1.4 

Legal requirements

1.4.1 Liability

 

♦  The information, data and tips stated in this operating manual were up-to-date as  

 

 

of the printing date. 

 

 

No claims for already delivered lubricators can be made based on the 

 

 

information, pictures and descriptions.

 

♦  perma-tec GmbH & Co. KG can not be held liable for damages and malfunctions  

 

 

caused by: 

 

▪ 

inappropriate usage;

 

▪ 

unauthorized alterations to the drive system or the LC unit;

 

 

inappropriate operations on or with the lubricator;

 

▪ 

incorrect operation and settings of the lubricator;

 

▪ 

incorrect settings of time and size of the lubricator;

 

▪ 

ignoring the operating manual.

  

1.4.2 Warranty

 

♦ 

Warranty terms and conditions: see terms and conditions of sale and delivery  

 

 

appertaining to perma-tec GmbH & Co. KG.

 

 

♦  Lodge any warranty claims with perma-tec immediately after the defect or error  

 

 

has been identified.  

 

♦  The warranty expires in all instances where no liability claims can be enforced.

Summary of Contents for Star Control Time





























Reviews: