7
d)
Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e)
Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g)
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of these
devices can reduce dust related hazards.
4) POWER TOOL USE AND CARE
a)
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b)
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c)
Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive
safety
measures reduce the risk of starting the power tool
accidentally.
d)
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e)
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Dear Customer,
Thank you for buying a Hidria Perles, d.o.o. power tool.
Should you have any questions, vagueness or second
thoughts about our products, we recommend you to
contact our experts in Sales and Service Departments,
who will advise you and help you find the right answers to
the set questions.
TECHNICAL SPECIFICATIONS
Model
PB 1223
PB 1232
Drill Ø in
– steel
– aluminium
– wood
mm
mm
mm
23/13
28/18
50/35
32/19
40/26
75/40
Power input
W
1150
1150
No load speed
1/min
260/480
180/310
Drill reception
cone # 2
cone # 3
Collar diameter
mm
62
62
Weight
kg
4,6
4,6
*Vibration level
m/s
2
2,75
<2,5
*Sound pressure level
dB(A)
84,2
91
**Noise level
dB(A)
97,2
104
Safety class
II
II
Noise and vibration
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the machine are:
Sound pressure level * dB (A);
Sound power level ** dB (A).
Measurement uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is * m/s
2
OPERATING CONTROLS
Spindle
Morse taper
Chuck
Taper follower
Switch ON/OFF
Lock button
Pipe handle
Spindle collar
Gear change knob
Accessory
Cord
Ventilation slots
STANDARD EQUIPMENT
x
Side
handle
x
Taper follower
x
Morse taper
SAFETY
x
Before use, please read the instructions on use very
carefully, as well as the safety instructions. These
instructions will help you to carry out your work in the
best possible way with no risk to yourself, your
workmates or your machine. We recommend that you
keep all the documents relating to your machine
