Perle 833IS, User Manual

Page: 44 / 340

Assembling the Hardware
28 Perle 833IS User Guide
Attaching the Rack
Mount The Rack Mount Kit provided can be used if you wish to install the 833IS in a
standard 19" equipment rack. Use the screws included in the Rack Mount Kit to
attach the Rack Mount brackets to the 833IS.
You require 4 Rack Mount screws (2 per side) to mount the 833IS in the Rack. Do
not install the 833IS in the Rack with fewer screws. For rack mounting, the 833IS
requires 1.5 rack mount space (i.e. the 833IS height is 1.5U). It is not necessary to
leave empty spaces above or below the unit in the rack.
Sufficient clearances must be maintained at both sides of the unit to allow proper air
flow to the internal fans.
Mounting of the equipment in the rack shall be such that a hazardous condition does
not occur due to uneven mechanical loading. Heavier equipment should be located
at the bottom of the rack, and the rack should be loaded such that the bottom slots
are used first (fill from the bottom up).
Circuits supplying power to the rack must be sufficient to safely supply power to all
equipment within the rack based on the equipment nameplate rating. Power
distribution to all equipment in the rack must have proper grounding. Particular
attention should be given to supply connections other than direct connections to the
branch circuit (e.g. power strips).
▲
Rack Mount