Perle 833IS, User Manual

Page: 26 / 340

Attaching to the Telephone Network
10 Perle 833IS User Guide
Attaching to the Telephone Network
See “Attaching to the Telephone Network” on page 42.
Now that the 833IS is configured, the telephone cables can be attached to the unit.
To attach the telephone line:
1. Power down the 833IS.
2. Attach the cable(s) from the phone network to the appropriate interface(s) on
the 833IS.
3.
Power up the 833IS.
4.
Verify that the 833IS can operate correctly with the telephone line.
Verifying Correct Operation
For details, see “Verifying Connection” on page 37.
At this point, installation is complete. Now you can verify that remote users can dial
into the 833IS and access the services. Also, you can install Perle Dial-Out software
on LAN PCs and verify that the Dial-Out is functioning correctly.
If you are using Perle Remote Client software, please see the Perle Remote User’s
Guide for details on software installation and operation.
If you are using Perle Dial-Out software, please see the Perle Dial-Out User’s Guide
for details on software installation and operation.