Perle 833IS, User Manual

Page: 199 / 340

Chapter 9: Configuring the Server
Perle 833IS User Guide 183
Dial-In
When a call comes in, the 833IS checks to see if the channel is assigned to a group.
If it is, the group profile for that call is used. Based on this profile, the 833IS will
allocate one of the modems assigned to the group. Also, other settings can optionally
be defined for this group:
■
User standard profile.
■
PPP protocol settings.
■
Bridge filter.
Dial-Out
Groups enabled for Dial-Out will appear in the "Available Pools" list of the Perle
833 Dial-Out client. A user selects a group from the list and is then assigned a
channel and modem that is defined to the group. Also, Dial-Out settings for flow
control, autodial, and packet forwarding can be customized for this group.
Callback
The Callback group is determined by an entry in the user record. A channel and
modem assigned to the group will be used when callback is required. There are no
optional group settings for Callback.
It is possible to enable a group for more than one mode of operation. That is, one
group can be enabled for Dial-In, Dial-Out, and Callback.
If a group is enabled for multiple modes, it will behave...
■
as a Dial-In group if a Dial-In call is received.
■
as a Dial-Out group if selected from the Dial-Out client.
■
as a Callback group if callback is required.
...if Dial-In, Dial-Out, and callback are enabled.