Perle 833IS, User Manual

Page: 135 / 340

Chapter 7: Configuring the Protocols
Perle 833IS User Guide 119
LAN port, click on LAN and enter the network and node address of the router that
will be used to reach the destination. To specify a WAN port, click on WAN and
then select the desired LAN-to-LAN connection from the drop-down menu.
Router IPX Address
This consists of two components - the network number of the local router and the
node (MAC) address of the local router.
■
Network Number : Specifies the network number for the local router. This must
be one of the network numbers that was configured in the IPX Frame Type
section on the previous screen.
■
Node Address : Specifies the MAC address for the local router. It is formatted as
12 hex digits.
Add
To configure a new static route, click on the Add button.
Edit
To edit an existing entry, select an entry from the table, and click the Edit button.
Delete
To delete an existing entry, select an entry from the table, and click the Delete
button.
SAP List
Displays the SAP list for the selected entry. For each IPX Static Route table entry,
you must configure the services you wish to have available. One server may have
multiple services on it, and you need to have a separate SAP entry for each one.