PerkinElmer Raman IdentiCheck Getting Started Manual Download Page 71

Page: 71 / 78

Maintenance and Troubleshooting . 71

Decontamination

Before using any cleaning or decontamination methods except those specified by

PerkinElmer, users should check with PerkinElmer that the proposed method will not damage

the equipment.

Customers wishing to return instrumentation and/or associated materials to

PerkinElmer for repair, maintenance, warranty or trade-in purposes are advised

that all returned goods must be certified as clean and free from contamination.

The customer’s responsible body is required to follow the “Equipment Decontamination

Procedure” and complete the “Certificate of Decontamination”. These documents are

available on the PerkinElmer public website:

http://las.perkinelmer.com/OneSource/decontamination.htm

Alternatively, if you do not have access to the internet contact Customer Care:

Customer Care USA:

1-800-762-4000

(inside the USA)

(8:30 a.m. – 7 p.m. EST)

(+1) 203-925-4602 (outside the USA)

Customer Care Canada: 800-561-4646

Customer Care EU:

0800 40 858

(Brussels)

0800 90 66 42

(Monza)

If you are located outside of these regions, please call your local PerkinElmer sales office for

more information.

Summary of Contents for Raman IdentiCheck















































































Search results

Summary of Contents for Raman IdentiCheck

Reviews:

Related manuals for Raman IdentiCheck

Brands by name

Popular brands

PerkinElmer Raman IdentiCheck, Getting Started Manual

Search results

Summary of Contents for Raman IdentiCheck

Reviews:

Related manuals for Raman IdentiCheck

Brands by name

Popular brands