PerkinElmer Raman IdentiCheck Getting Started Manual Download Page 75

Page: 75 / 78

Appendix A: Using your own PC . 75

Configuring the PC

Please refer to the manufacturer’s instructions for unpacking and assembling the PC.

Switch on the PC.

NOTE: Do not attach any cables between the instrument and the PC at this time.

If you are prompted to login to Windows when you start the PC, log in.

Click OK.
You can now start using the PC.

It is important that the PC used with Raman IdentiCheck does not switch into Standby

mode.
Select the Display option on the Control Panel. On the Screen Saver page of the

Display Properties dialog, click Power and then set the System standby and Turn off

hard disks values to Never for both Plugged in and Running on batteries.

NOTE: To help ensure PC security, we recommend that the Administrator Password is

changed regularly. For more information, see your Microsoft Windows

documentation.

Summary of Contents for Raman IdentiCheck















































































Search results

Summary of Contents for Raman IdentiCheck

Reviews:

Related manuals for Raman IdentiCheck

Brands by name

Popular brands

PerkinElmer Raman IdentiCheck, Getting Started Manual

Search results

Summary of Contents for Raman IdentiCheck

Reviews:

Related manuals for Raman IdentiCheck

Brands by name

Popular brands