manualshive.com logo in svg

Perkin-Elmer Lambda 20, Installation And Maintenance Manual

Share
Download
Perkin-Elmer Lambda 20 Installation And Maintenance Manual Download Page 76

System Description 

75 

System Description 

Features 

 

Figure 16  Lambda 20, 40 Spectrometer Features 

Optical System Lambda 20 

The Lambda 20 UV/Vis Spectrometer features an all-reflecting optical system. The 
optical components are coated with silica for durability. A holographic grating is 
used in the monochromator. 

The optical system is depicted schematically in Figure 17. 

The monochromator is a holographic concave grating with 1053 lines/mm in 
the center. 

Two radiation sources, a deuterium lamp and a halogen lamp, cover the working 
wavelength range of the spectrometer. 

Keyboard and 
Display Cover 

Lamp compartment 

Power switch 

Connector panel 

Sample compartment 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands