manualshive.com logo in svg

Perkin-Elmer Lambda 20, Installation And Maintenance Manual

Share
Download
Perkin-Elmer Lambda 20 Installation And Maintenance Manual Download Page 36

Basic Installation 

35 

NOTE: 

 You should align microcells very carefully in the radiation beam by following the 

procedures in 

Aligning the Single Cell Holder

 on page 31. When aligning 

microcells, fill each cell with the minimum volume of liquid specified in the above 
table to make sure that the liquid meniscus is not in the radiation beam. 

Setting up the Printer 

Activating the Internal Printer 

If you want to use the internal printer, make sure the method 

PRINTER CONFIG.

 is 

set to 

EPSON/INTERNAL

 in Super User. On delivery, the default setting is 

EPSON/INTERNAL.

 

Connecting an External Printer 

You can use an external printer for hard-copy printouts of the analytical results. 
PerkinElmer offers suitable printers; refer to the current price list for details. 

To install an external printer: 

1.  Switch off the spectrometer, if it is on. 

2.  Set up the printer as given in the User’s Guide provided with the printer. 

3.  Configure the printer. 

4.  Connect the printer to the Parallel Port. 

If you connect the printer to the second RS 232 interface, make sure the 
Instrument Configuration method is set correctly in Super User. 

5.  Switch on the spectrometer and the printer to activate the new printer 

configuration. 

6.  Make sure the method 

PRINTER CONFIG.

 is set correctly for the connected 

printer in Super User. 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands