Perkin-Elmer Lambda 20 Installation And Maintenance Manual Download Page 13

Page: 13 / 108

Lambda 20, Lambda 40 UV/Vis Spectrometers

Environment

Operating Conditions

WARNING

Explosive Atmosphere

This instrument is not designed for operation in an explosive
atmosphere.

The instrument will operate correctly under the following conditions:

•

Indoors.

•

Ambient tempe15 ºC to +35 ºC.

•

Ambient relative humidity 20% to 80%, without condensation.

•

Altitude in the range 0 m to 2000 m.

Storage Conditions

You can store the instrument safely under the following conditions:

•

Indoors.

•

Ambient tempe15 ºC to +35 ºC.

•

Ambient relative humidity 20% to 80%, without condensation.

•

Altitude in the range 0 m to 2000 m.

When you remove the instrument from storage, before putting it into operation allow
it to stand for at least a day under the approved operating conditions.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 20













































































































Search results

Summary of Contents for Lambda 20

Reviews:

Brands by name

Popular brands

Perkin-Elmer Lambda 20, Installation And Maintenance Manual

Search results

Summary of Contents for Lambda 20

Reviews:

Brands by name

Popular brands