Perkin-Elmer Lambda 20 Installation And Maintenance Manual Download Page 45

Page: 45 / 108

Lambda 20, Lambda 40 UV/Vis Spectrometers

Temperature Sensor

WARNING

Electrical hazard

To prevent potential injury to yourself and damage to the instrument,
switch OFF all instruments in the system and disconnect them from the
line power supply before you alter, or make any new, electrical
connections.

Installation Overview

NOTE:

When connecting the temperature sensor, align the red mark on the plug with the red

mark on the socket.
Pull the collar on the plug back to connect/disconnect the plug. Release the collar to
secure the plug.

Connector on Spectrometer:

Temp J10

Installation:

See temperature sensor description

Cables:

Lead through the tube ports

Sample Compartment Cover:

Unchanged

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 20













































































































Search results

Summary of Contents for Lambda 20

Reviews:

Brands by name

Popular brands

Perkin-Elmer Lambda 20, Installation And Maintenance Manual

Search results

Summary of Contents for Lambda 20

Reviews:

Brands by name

Popular brands