manualshive.com logo in svg

Perkin-Elmer Lambda 20, Installation And Maintenance Manual

Share
Download
Perkin-Elmer Lambda 20 Installation And Maintenance Manual Download Page 54

Maintenance 

53 

2.  Using a soft cloth and mild laboratory detergent solution, lightly scrub away all 

foreign material. 

3.  Using a clean cloth dampened with water, rinse the cleaned surfaces 

thoroughly. 

4.  Dry with lint free cloth or tissue. 

Sample Compartment Window 

Windows are provided with the spectrometer. The window is made of silica and may 
be used in the entire spectral range of the spectrometer. 

The window seals the sample compartment and thus protects the instrument’s optics 
from dust and fuming or aggressive samples. 

• 

Generally, the window should be installed at all times. 

• 

The window is an optical component and requires the same care and handling 
as cells. 

• 

You can remove the window to clean it. The frame is magnetic and can be 
removed by hand. 
Windows are most suitably cleaned by wiping them with a soft cloth moistened 
with ethanol. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands