Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.4.3
©Perenio IoT spol s r.o. All rights reserved
Page 36 of 49
You can run the created scenario by clicking on the button of the same name in the
“Scenario” tab.
Scenario 2: turn on/off the power plug when the opening sensor is triggered
In this case, you need to select from the list the sensor or sensors that will serve as a
trigger to start the scenario as well as the “Opened/Closed” state and click “Next”.
Select the action “Turn on/off the power”, select the power plug and click “Next”.
Enter the name of the scenario and click “Save”.
