Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.4.3
©Perenio IoT spol s r.o. All rights reserved
Page 20 of 49
2.
Press and hold the Power Button until the LED indicator starts flashing violet.
Release the button and wait for the indicator to start blinking blue.
2.1.3 Activation in the Perenio Smart Mobile Application
To connect the Power Link device through the Control Gateway or the IoT Router, the
User shall perform the following steps:
1. Unpack the device and plug it into the source of power (See par. 2.1.1).
2. Login in to the Perenio Smart Building Management System User Account
(
See par. A below
).
3. Activate the device in the application (See par. B below).
4. Enter the desired
power plug
name and select the Room of installation
.
A
.
LOGIN TO THE EXISTING USER ACCOUNT
a. Enter your e-mail address and password in the login
screen;
b. Click on the LOG IN button.
NOTE. If the password was lost, the User can restore it by
clicking on a corresponding link on the screen.
To restore a forgotten password, use the e-mail address
linked to your User Account, to which instructions on
changing the password will be sent.
