Installation and Operation Manual
for Perenio® Power Link Devices
©Perenio IoT spol s r.o. All rights reserved
Doc Version: 1.4.3
Page 21 of 49
B
.
CONNECTION TO THE CONTROL GATEWAY/IOT ROUTER
a.
Make sure the Control Gateway/IoT Router is
activated and “Online” in the mobile app;
b.
Click on the “+” icon in the upper right corner of the
Devices tab, select “Add new device” and then the
Power Link device in the list;
c.
Select the Control Gateway/IoT Router to which the
power plug shall be connected (This screen will be
displayed, only if there are several Control
Gateways/IoT Routers activated in the User Account);
NOTE. The
Control Gateway/IoT Router
must be
connected to the mains and the Internet, as well as
activated in the Perenio Smart App.
d.
Start searching for devices;
e. Press and hold the reset button until the LED Indicator
starts blinking violet
;
NOTE. Several smart plugs and other Zigbee devices may
be connected to the
Control Gateway/IoT Router
at once.
