Installation and Operation Manual
for Perenio® Power Link Devices
Doc Version: 1.4.3
©Perenio IoT spol s r.o. All rights reserved
Page 26 of 49
Setting the Default State
By default, the power plug is switched to the OFF state
every time it is rebooted, unlocked or plugged in.
However, the User may set a custom default state. The
following options are available:
•
Last state, i.e. the one in which the Power Link
device was before rebooting, unlocking and
plugging into the mains;
•
Turned on;
•
Turned off.
To set the default state, click on the “Default state” field
in the device settings and select the desired option.
2.1.5 Activation in Apple HomeKit
To manage the device in Home application (Apple HomeKit), the User shall switch it
to the Bluetooth Mode (See par. 2.1.2 above) and add it as an accessory by scanning
the QR Code contained on the back cover of the Quick Start Guide.
NOTE. When connecting, the User shall follow instructions in the Apple application
which are also uploaded to the company’s website at perenio.com/faq.
2.1.6 Management Through Google, Yandex and Amazon Apps
To control the smart plug via the Google Home application, Yandex Smart Home or
Amazon Alexa, it must be previously activated in the Perenio Smart application (See
par.2.1.3 above).
NOTE. When activating the Power Link in Google Home, Yandex Smart Home or
Amazon Alexa, the User shall follow instructions specified in corresponding Google
and Yandex applications or uploaded at perenio.com/faq.
