TTD-03.1 Electromechanical Box Tripod Turnstile
21
Table 2 Pulse control mode (the jumper is set on the connector J1)
№
The turnstile
operating modes Actions to do
Indication
on the RC
Indication on the
turnstile
Response
to the barrier arm
turning
1
Always locked
(Closed for entry
and exit)
Press the
STOP
button on the RC
The red
indicator
above the
STOP
button is on
The two “Red
cross” pictograms
(left and right) are
on
2
Single passage in
the set direction
(open for passage
of one person in
the chosen
direction)
Press the button
on the RC
corresponding to
the chosen
passage
direction
The green
indicator
above the
button of the
chosen
passage
direction is
on
The “Green arrow”
pictogram,
showing the
passage direction,
and the “Red
cross” pictogram
from the opposite
side are on
Turnstile gets blocked
3
Bidirectional single
passage (open for
one-by-one person
passage in each
direction)
Press both the
left and right side
buttons on the
RC
simultaneously
The two
green
indicators
(left and
right) are on
The two “Green
arrow” pictograms
(left and right) are
on
Turnstile gets blocked
for passage in that
direction
4
Free passage in
the set direction
(open for free
passage in the
chosen direction)
Press the
STOP
button and the
button
corresponding to
the chosen
passage
direction
simultaneously
The green
indicator
above the
button of the
chosen
passage
direction is
on
The “Green arrow”
pictogram,
showing the
passage direction,
and the “Red
cross” pictogram
from the opposite
side are on
Turnstile remains open
in the set direction
5
Free passage in
the set direction
and single passage
in the opposite
direction (open for
free passage in the
chosen direction
and for a person’s
passage in the
opposite direction)
Carry out actions
stated in
Chapters 2 and
4 of the present
table in any
order
The two
green
indicators
(left and
right) are on
The two “Green
arrow” pictograms
(left and right) are
on
After the passage in the
free passage direction
the turnstile remains
open in both directions.
After the passage in the
single passage direction
the turnstile remains
open in the free passage
direction but it is gets
blocked in the single
passage direction
6 Always free (open
for entry and exit).
Press all the 3
buttons on the
RC
simultaneously
The two
green
indicators
(left and
right) are on
The two “Green
arrow” pictograms
(left and right) are
on
Turnstile remains open
Note:
Pressing the button on the RC-panel corresponds to the low-level signal supply to the
contacts (“Unlock A”, “Unlock B” and “Stop”) of the “XT1.L” connector block relatively to the
contact “GND”.
At the turnstile power supply switching-on the turnstile initial state is closed (the mechanical
release lock (8) should be locked with the key).
