ST-02 Speed gate and STD-02 Double-sided section
45
10 MAINTENANCE
Maintenance of the speed gate is carried out only by the manufacturer or
PERCo
service centers.
It is recommended to use liquid non-abrasive cleaners that contain ammonia for cleaning the
speed gate sections and sliding panels from dirt.
11 TRANSPORTATION AND STORAGE
Speed gate storage is allowed in dry indoor facilities at ambient air temperature from -40°C to
+50°C at relative air humidity 80% at +15°C. There should be no pair of acids, alkalis, and
corrosive gases in the storage room.
Speed gate should be transported in the original package and in closed freight containers or other
closed type cargo transport units (in rail wagons, containers, closed cars, holds, airplanes, etc.).
It is not allowed to stack boxes during transportation and storage.
After transportation or storage at temperatures below zero or at high air humidity, the speed gate it
must be kept in the package for at least 24 hours in climatic conditions corresponding to the
operating conditions before installation procedures.
