CT/L-14 Controller Web-Interface
41
•
When connecting to the controller operating under software of
PERCo
systems, the
current format may not be shown (nothing is selected from the formats). In this case
change of the card identifiers reading format is
PROHIBITED
.
To select the reading format of card identifiers:
1. Click consistently
Settings
Card format
in the Web-interface menu. The page with working
area will be opened:
2. Using the drop-down
Readers operating mode
list select one of offered formats and click the
Save
button.
4. CONFIGURATION
4.1
Controller configuration template
Attention!
If the configuration
template is updated, the previous configuration will be reset to the
default template parameters. The list of recorded access cards identifiers, related user
information, access rights and parameters remain the same.
To change the configuration of the controller:
1. Click
Settings
Template
in the Web-interface menu.
The page with working area will be
opened:
The following configuration templates are available for the
CT/L-14
controller:
•
Vehicle checkpoint;
•
Vehicle checkpoint and locks;
•
Vehicle checkpoint and turnstile;
•
Locks;
•
Turnstile and locks;
•
Turnstiles;
•
Lock lock-chamber;
•
Rotor turnstile lock-chamber;
•
Turnstile-and-lock lock-chamber;
•
Turnstile lock-chamber.
Note:
The plural number of ODs in the name of the configuration template means that when
applying the template, the maximum quantity of OD data will be configured, based on the
resources of the controller. After selecting a template, unnecessary ODs can be deleted.
