Pepperl+Fuchs VisuNet GXP Series, Manual, Page: 53 / 56

VisuNet GXP
Mechanical Installation
2
0
2
0
-0
4
53
Installation Steps
1.
Open the AG1 housing. See chapter 3.3.5
2.
Install cable glands with counter nuts and the two ground studs into the AG1 back wall where
indicated in the image below.
3.
Close the AG1 housing.
4.
Install the wall bracket to the AG1 housing with the included M8 screws and lock washers.
5.
Install the assembled unit to the wall with the appropriate mounting material.
Note
Secure the cable gland counter nut with a medium-strength bolt adhesive (e.g., Loctite ®
Threadlocker Blue 243 ® ).