2
0
2
0
-0
4
26
VisuNet GXP
Mechanical Installation
Positioning and Floor-Mounting the GXP
1.
Remove the box from under the pedestal and carefully position the system upright on the floor
with a crane or the help of another person.
2.
Mount the pedestal onto the floor using suitable screws.
3.
Remove the protective foam blocks.
4.
Remove the protective plastic film from the screen. This should not be present in a hazardous
location.
Warning!
Proper floor mounting
It is the installer's responsibility to select a suitable location with sufficient
strength to hold the equipment. It is the installer's responsibility to select the
proper screws based on the installation conditions.
Note
For more information on floor mounting, including hole patterns, see see chapter 3.3.1.
Note
The StandardLine pedestal is depicted above. Follow the same steps to mount the VisuNet
GXP with the BasicLine pedestal.