Pepperl+Fuchs VisuNet GXP Series, Manual, Page: 50 / 56

2
0
2
0
-0
4
50
VisuNet GXP
Mechanical Installation
The panel mount option is mounted from the front and placed outside the wall surface. The
monitor protrudes slightly and is exposed.
The maximum wall thickness for panel mount installation with the VisuNet GXP is 10 mm.
Use the drilling pattern below to drill holes into the surface in which the panel is to be mounted.
Use the included bolts to fasten the panel into the wall. Tighten all bolts with a torque of 4 Nm.
Figure 3.9 The cut-out dimensions for the VisuNet GXP 19-inch are 480 x 400 mm.
Note
If installing the device in a different housing, ensure that the operating temperature is within the
specified range or up to +50
°
C.
Drilling Pattern
499
480
167
4
1
9
4
0
0
2
7
0
Ø
6.5
±
0.5
(1
4 x)