Pepperl+Fuchs 1001B Series Installation & Operation Manual Download Page 19

BEBCO EPS

Fuchs®Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.bebcoeps.com
Telephone (330) 486-0002 • FAX (330) 425-4607 • E-Mail: [email protected]

19

Warranty Terms and Conditions

FUCHS STANDARD 24-MONTH WARRANTY

1.

Limited Warranty. P Fuchs, Inc. (“P+F”) warrants Purge Units and components for Purge Units manufactured by
P+F (“Product” or “Products”) to be free from defects in material and workmanship under Normal Use for a period of
twenty-four (24) months from the date of shipment of such Products from P+F’s warehouse or place of manufacture (or
from P+F’s authorized representative or distributor). Only the original purchaser of such Products (the “Customer”) shall
be entitled to the benefit of the foregoing Limited Warranty. No representative, agent or salesman of P+F is authorized to
give or provide any warranty or make any representation contrary to or in addition to the foregoing Limited Warranty.

2.

Inspection and Claims. Customer must inspect and test all Products upon receipt. All claims under the Limited Warranty
provided herein must be made within thirty (30) days of the discovery of the defect. Customer must obtain shipping
instructions from P+F prior to returning any Product, which Product must be returned at Customer’s expense in
accordance with P+F’s instructions.

3.

Limitations and Exclusions. “Normal Use” shall mean use and operation within rated capacities, at the correct voltage, and
with any required maintenance as provided in the applicable P+F Operating Manuals. The Limited Warranty provided
herein does not apply to (i) any Products which have been altered or modified in any way or disassembled by the
Customer or anyone else, (ii) any Products which have been subject to misuse, negligence or accident, or improperly
installed, changed, substituted or replaced, (iii) any part or component not manufactured by P+F, or (iv) any part or
component that is subject to wear or consumption. For parts or components not manufactured by P+F, the Customer or
any other user or owner shall have only the warranty provided by the manufacturer of such part or component.  The
Limited Warranty set forth herein is also subject to the following:

(1) The Limited Warranty is limited to electronic and mechanical performance only, as expressly detailed in

the product specifications, and does not apply to cosmetic appearance;

(2) The Limited Warranty shall not apply to any cables attached to, or integrated with, any Products.

(3) The Limited Warranty shall not apply to any Products which are stored, or utilized, in harsh environmental

or electrical conditions outside P+F’s written specifications.

THE LIMITED WARRANTY SET FORTH HEREIN IS THE ONLY WARRANTY MADE BY P+F WITH RESPECT TO THE
PRODUCTS. IT IS EXPRESSLY AGREED AND UNDERSTOOD THAT P+F MAKES NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. EXCEPT FOR THE LIMITED WARRANTY SET FORTH
HEREIN, THERE IS NO OTHER WARRANTY, EXPRESS, IMPLIED OR STATUTORY; AND THERE IS NO AFFIRMATION OF
FACT OR PROMISE BY P+F WITH REFERENCE TO THE PRODUCTS. IN NO EVENT SHALL P+F BE LIABLE FOR
ACTUAL OR ANTICIPATED LOST PROFITS OR FOR INCIDENTAL OR CONSEQUENTIAL OR PUNITIVE DAMAGES OR
FOR DAMAGES RESULTING FROM BUSINESS INTERRUPTION, OR INJURY OR DEATH OF PERSONS, OR INJURY TO
PROPERTY. P+F’S LIABILITY ON ANY CLAIM OF ANY KIND ARISING OUT OF, CONNECTED WITH OR RESULTING
FROM THE DESIGN, MANUFACTURE, SALE, REPAIR OR OPERATION OF A PRODUCT, SHALL NOT EXCEED THE
PRICE ALLOCABLE TO THAT PRODUCT OR THE PART THEREOF WHICH GIVES RISE TO THE CLAIM. THE REMEDY
SET FORTH IN THIS LIMITED WARRANTY CONSTITUTES THE SOLE AND EXCLUSIVE REMEDY OF THE CUSTOMER.
P+F SHALL NOT BE LIABLE FOR PENALTIES OF ANY DESCRIPTION.

4.

Limitation of Remedies. In the event of P+F’s liability, whether on this Limited Warranty or based on contract, tort
(including, but not limited to, negligence and strict liability) or otherwise, Customer’s sole and exclusive remedy will be
limited to, at P+F’s option, the repair or replacement (f/o/b P+F’s place of manufacture) by P+F of any non-conforming
items for which claim is made by Customer in accordance with paragraph 2, or the repayment of the portion of the
purchase price paid by Customer attributable to the non-conforming item.

5.

Responsibility of Customer: Safety and Protection Precautions. P+F takes great care to design and build reliable and
dependable Products; however, some Products can fail eventually. Customer must take precautions to design its
equipment to prevent property damage and personal injury in the unlikely event of a failure. AS A MATTER OF POLICY,
P+F DOES NOT RECOMMEND THE INSTALLATION OF PRODUCTS AS THE SOLE DEVICE FOR THE PROTECTION OF
PERSONNEL OR PROPERTY AND, THEREFORE, THE CUSTOMER SHOULD BUILD IN REDUNDANCY OR DUAL
CONTROL USING APPROVED SAFETY DEVICES FOR THESE APPLICATIONS.

6.

Conflicts. In the event there is any conflict between the provisions of this Limited Warranty and any provisions contained in
any orders, offers, acceptances or other writings or statements provided or made by Customer to P+F, the provisions of
this Limited Warranty shall prevail, and the contract between P+F and the Customer shall be deemed formed only upon
the provisions set forth in this Limited Warranty, and any additional or conflicting provision inserted by Customer shall be
of no force or effect.

 

ISC * 877-602-0010 * www.iscenclosurecooling.com

Summary of Contents for 1001B Series





















Reviews: