Penveu penveu32 User Manual Download

Page: 23 / 86

2.4

SET UP the Display

Follow these steps in order to prepare your equipment for best

penveu

performance.

With your projector:

With your HDTV or display:

Set the computer resolution to match the
native resolution of the projector.

The

penveu system

will indicate if the

resolutions are not matched correctly. This
information will appear in the on-screen
prompt during the CONNECT the PEN process.

If using multiple displays, such as a laptop
screen and projector, set the computer to
“duplicate/clone” the image in both displays.

If the computer does not support the native
resolution of the display device, set the
computer to display the image on the display
device ONLY.

On the projector, check these special settings:



Turn-off or dim overhead lighting above
the display

. If the images on screen are too

bright to clearly see your presentation, then
the

pen

camera can’t see the screen either.



Aspect ratio –

set to Auto or Standard mode

(i.e. not stretch mode, not forced wide, not
enable fit to screen) Ensure the image is
focused clearly.



Zoom

may affect performance on some

projectors. Disable if needed.



Ensure the projected image is rectangular
in shape, do not use the keystone option



Enhanced Brilliance and/or enhanced
brightness

setting should be set to balance

the lighting conditions in the room. Enable if
the room has excess ambient light, and
disable if the room is darker



Use the DISPLAY menu

system to select the

correct format

(sRGB, RGB or VGA)

Set the computer resolution to match the
native resolution of the display or TV
resolution.

If using multiple displays, such as a laptop
screen and projector, set the computer to
“duplicate/clone” the image in both
displays.

If the computer does not support the
native resolution of the display device, set
the computer to display the image on the
display device ONLY.

Adjust HDTV settings as follows:



Backlight –

can be as high as you prefer



Brightness –

set to the middle of the

range



Contrast –

set to the middle of the

range



Aspect ratio –

set to Auto or Standard

mode (i.e.

not stretch mode

not forced

wide, not enable fit to screen)



OPC (Optical Picture Control) –

Turn-off

if enabled



Use the DISPLAY menu

system to select

the correct format

(sRGB, RGB or VGA)

NOTE:

Refer to the FAQs on

support.penveu.com

for brand-specific settings information

Summary of Contents for penveu32






















































































Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands

Penveu penveu32, User Manual

Search results

Summary of Contents for penveu32

Reviews:

Related manuals for penveu32

Brands by name

Popular brands