Pentax OPTIO VS20 Operating Manual Download Page 42

Page: 42 / 240

Getting Started

Turning the Camera On and Off

Press the power switch.

The camera turns on and the display turns on.
When you turn the camera on, the lens cover opens and the lens
extends.
If the [Language/

] screen or [Date Adjustment] screen appears

when you turn the camera on, follow the procedure on p.42 to set the
display language and/or current date and time.

Press the power switch again.

The display turns off, the lens closes, and the camera turns off.

The memory card is checked when the camera
turns on and the memory status is displayed.

The SD Memory Card is inserted.
Images will be saved on the SD
Memory Card.

The SD Memory Card is not inserted.
Images will be saved in the built-in
memory.

Taking Still Pictures

p.64

Checking the Memory Card

Power switch

14:25

02/02/2012

Memory status

Downloaded From camera-usermanual.com

Summary of Contents for OPTIO VS20

















































































































































































































































Search results

Summary of Contents for OPTIO VS20

Reviews:

Related manuals for OPTIO VS20

Brands by name

Popular brands

Pentax OPTIO VS20, Operating Manual

Search results

Summary of Contents for OPTIO VS20

Reviews:

Related manuals for OPTIO VS20

Brands by name

Popular brands