Pentax OPTIO VS20, Operating Manual

Page: 167 / 240

165
5
Edi
tin
g an
d Pri
n
ti
ng
Ima
g
es
Optional Frames
In addition to the built-in frames, the CD-ROM (S-SW122) contains a total of 90
optional frames. These frames can be stored either in the built-in memory or on
SD Memory Cards. To save the optional frames into the built-in memory, do so
after removing the SD Memory Card.
To Copy Frames
1
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be
copied onto the card, not into the camera's built-in memory.
2
Connect the camera to the computer using the
provided USB cable.
See “Connecting with Computers” in chapter 7 for instructions on
connecting the camera to a computer.
3
When the device detection window opens, click
[Cancel].
4
Insert the CD-ROM (S-SW122) into the CD-ROM drive.
5
When the top screen opens, click [EXIT].
6
If there is not already a “FRAME” folder in the root
directory of the camera (removable disk), create the folder.
7
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (removable disk).
For information on working with files on your computer, refer to the
instruction manual supplied with the computer.
8
Disconnect the USB cable from the computer and
camera.
See “Connecting with Computers” in chapter 7 for instructions on
disconnecting the cable.
• Frames can be stored both in the built-in memory and on SD Memory
Cards, but using large numbers of frames may slow down
processing speed.
Downloaded From camera-usermanual.com