Pentax Optio RX18, Operating Manual

Page: 133 / 260

131
3
Ta
king
Pict
ures
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to
O
(On)
(the settings are saved when the camera is turned off), while for others
you can choose
O
or
P
(Off) (to choose whether the settings are saved
or not when the camera is turned off). The items which can be set to O
or
P
in the Memory function are shown in the table below. (Items not
listed here are always saved in the selected settings when the camera is
turned off.)
If you select
O
, the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P , the
settings will be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is
O
or
P
.
Item Description
Default
Setting
Page
Face Detection The Face Detection mode set with the
I
button P p.72
Flash Mode The flash mode set with the four-way controller (
4
)
O
p.102
Drive Mode The drive mode set with the four-way controller (
2
)
P
p.92
p.93
Focus Mode The focus mode set with the four-way controller (
5
)
P
p.104
Zoom Position The zoom position set with the zoom lever P p.78
MF Position
The manual focus position set with the four-way
controller (
23 )
P
p.105
White Balance
The [White Balance] setting on the [
A
Rec. Mode]
menu
P p.112
Sensitivity The [Sensitivity] setting on the [ A Rec. Mode] menu P p.115
EV
Compensation The [EV Compensation] setting on the
[
A Rec. Mode] menu
P
p.110
AE Metering
The [AE Metering] setting on the [
A
Rec. Mode]
menu
P p.114
Digital Zoom
The [Digital Zoom] setting on the [
A
Rec. Mode]
menu
O
p.80
DISPLAY
The information display mode set with the
4 /
W
button
P
p.22
File No.
If a new SD Memory Card is inserted when
O
(On)
has been selected, file numbers are assigned
sequentially O —