manualshive.com logo in svg

Pentax Optio E90 Black, Operating Manual

Share
Download
Pentax Optio E90 Black Operating Manual Download Page 35

33

1

Getting Started

Precautions When Using an SD Memory Card

• The SD Memory Card is equipped with a write-

protect switch. Setting the switch to LOCK 

prevents new data from being recorded on the 

card, the stored data from being deleted, and 

the card from being formatted by the camera or 

computer.

r

 appears on the display when the card is 

write-protected.

• Care should be taken when removing the SD Memory Card immediately after 

using the camera, as the card may be hot.

• Keep the card cover closed and do not remove the SD Memory Card or turn 

the camera off while images are being played back or saved to the card, or 

the camera is connected to a computer with the USB cable, as this may 

cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away 

from water and store away from high temperature.

• Do not remove the SD Memory Card during formatting as this may damage the 

card and render it unusable.

• The data on the SD Memory Card may be deleted in the following 

circumstances. We do not accept any liability for data that is deleted

(1) when the SD Memory Card is mishandled by the user.

(2) when the SD Memory Card is exposed to static electricity or electrical 

interference.

(3) when the card has not been used for a long time.

(4) when the card is ejected or the batteries are removed while the data on 

the card is being recorded or accessed.

• If it is not used for a long time, the data on the card may become unreadable. 

Be sure to regularly make a backup of important data on a computer.

• Avoid using or storing the card where it may be exposed to static electricity or 

electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed 

to rapid changes in temperature or to condensation.

• When using an SD Memory Card with a slow recording speed, recording may 

stop while you are taking movies even when there is adequate space in the 

memory, or shooting and playback may take a long time.

• Be sure to format an SD Memory Card that is unused or has been used on 

another camera. Refer to “Formatting an SD Memory Card” (p.140).

Write-protect

switch

Summary of Contents for Optio E90 Black











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands