Pentax 645 NII, Operating Manual

Page: 56 / 100

ADV
A
NCE
D
OP
ERATIONS
54
1. Set the auto bracketing selector to the desired
exposure compensation value.
2. Press the shutter release button fully. Three pic-
tures are taken consecutively according to the
auto-bracketing switch you have set.
•
Three pictures are taken consecutively as follows.
First picture: Correct exposure
Second picture: Underexposure
Third picture:
Overexposure
•
The sequence of the auto bracketing exposures can be
changed with Pentax Function No.3.
•
The camera automatically measures the exposure for
each shot.
•
The focus is locked at the first picture and remains
locked until all pictures are taken.
•
If you let go of the shutter release button during auto
bracketing, the auto-bracketing will remain effective
until the viewfinder indication goes off. After that, the
camera returns to the shooting status before the first
frame was taken.
Auto Bracketing Exposure Mode combined with the
Exposure Compensation function.
You can combine the auto bracketing exposure mode with
the exposure compensation function.
The auto-bracketing will work in accordance with the
exposure compensation value set.
Auto Bracketing Exposure Mode combined with the
Metered Manual Mode.
You can combine the auto Bracketing exposure mode
with the metered manual mode (except X sync speed).
The auto-bracketing will work with changing only the shut-
ter speed. The bar graph of the metered manual mode is
only displayed in the viewfinder. The bar graph of the
exposure compensation value is not displayed.
with 1/3EV set with 1/2EV set