Pentax 645 NII Operating Manual Download Page 19

Page: 19 / 100

BASIC OPERATION

(PREP

TION)

3. To remove the front lens cap, squeeze the tabs

on the both sides in the direction of the arrow.

•

With a non-autofocus lens attached, all available
functions in this camera operate except autofocus
operation.

•

We assume no responsibility nor liability for dam-
ages resulting from the use of lenses made by
other manufacturers.

•

The camera body and lens mount incorporate lens
information contacts and an AF coupler. Dirt, dust,
or corrosion may cause damage to the electrical
system. Clean the contacts with a soft, dry cloth.

* How to remove
To remove the lens, turn it to the left while
pressing the lens unlock button.

•

To protect the contacts and AF coupler of the lens
against damage after removal, be sure to set the
lens down with the mount side facing upward.

Summary of Contents for 645 NII





































































































Search results

Summary of Contents for 645 NII

Reviews:

Related manuals for 645 NII

Brands by name

Popular brands

Pentax 645 NII, Operating Manual

Search results

Summary of Contents for 645 NII

Reviews:

Related manuals for 645 NII

Brands by name

Popular brands