Pentax 645 NII Operating Manual Download Page 8

Page: 8 / 100

FOR SAFE USE OF YOUR CAMERA

Although we have carefully designed this camera for safe operation, please be sure to follow precautions
given on this page.

WARNING This mark indicates precautions that, if not followed, could result in seri-

ous injuries to the operator.

CAUTION This mark indicates precautions that, if not followed, could result in

minor or medium injuries to the operator or damage to the equipment.

WARNING

•

Wrapping the strap around your neck is dangerous.
Make sure that small children do not get the strap
caught around their neck.

•

Do not look directly at the sun through the camera, as
viewing the sun for an extended period may damage
your eyes.

CAUTION

•

Never try to disassemble, short or recharge the bat-
tery. Also, do not dispose of the battery in fire, as it
may explode.

•

Remove the batteries from the camera immediately if
they become hot or begin to smoke. Be careful not to
burn yourself during removal.

Summary of Contents for 645 NII





































































































Search results

Summary of Contents for 645 NII

Reviews:

Related manuals for 645 NII

Brands by name

Popular brands

Pentax 645 NII, Operating Manual

Search results

Summary of Contents for 645 NII

Reviews:

Related manuals for 645 NII

Brands by name

Popular brands