16
Gettin
g
Sta
rte
d
1
You can remove the battery from the camera and charge it.
3
Place the battery in the battery charging stand so that
the PENTAX name is visible.
The BATTERY charging indicator on the stand lights red while the
battery is being charged and goes out when charging is completed.
4
Remove the battery from the battery charging stand
when charging is completed.
Charging the Battery by Itself
• You can put the camera and the battery together on the battery
charging stand to charge the battery inside the camera and a
spare battery.
• The time required for full charge is about 100 minutes.
The appropriate ambient temperature range for charging the
battery is 0°C – 40°C (32°F – 104°F).
• The charging time may vary depending on the ambient
temperature and charging conditions.
• When the battery reaches the end of its service life, the time that
the camera can be operated becomes shorter even when the
battery is fully charged. In this event, replace the battery.
• You can also remove the battery from the camera and charge it using
the optional battery charger K-BC8.
• Always charge the battery before using the camera for the first
time or when the battery has not been used for a long time.
• Do not use the battery charging stand D-BC42 to charge batteries
other than D-LI8 rechargeable lithium-ion batteries, as the
charging stand may overheat or be damaged as a result.
• If the battery is inserted correctly but the charging indicator fails to
light red, the battery may be faulty. Replace with a new battery.
3
BATTERY charging
indicator
Summary of Contents for 18903 - Optio A10 8MP Digital Camera
Page 188: ...186 8 Appendix Write protect switch 23 Z Zoom 69 Zoom button 12 37 38 Zoom Display 107 ...
Page 189: ...Memo ...
Page 190: ...Memo ...
Page 191: ...Memo ...