![background image](http://html1.mh-extra.com/html/pentair/thermalflo-hp/thermalflo-hp_user-manual_1524621033.webp)
25
Installation and User’s Guide
POOL
IDLE/HEAT/COOL
SET=__ ACT=__
SPA
IDLE/HEAT/COOL
SET=__ ACT=__
HEAT / COOL / AUTO
SET TO - H/C/A
CONTROL PANEL MENU SCREENS
To scroll through the menu screens press the MENU SELECT button to view each screen. While in the menu
screens, if no activity is detected after 15 seconds, the main screen is displayed.
1.
Pool Run Screen
– Displays whether the heat pump is idle, heating or cooling if the Pool set point is active.
This screen also displays the water temperature set point and the actual measured water temperature.
The Pool set point can be raised or lowered using the UP and DOWN arrows while this screen is displayed.
The display will automatically return to this screen after 15 seconds of push button inactivity when the
Pool set point is active.
2.
Spa Run Screen
– Displays whether the heat pump is idle, heating or cooling if the Spa set point is active.
This screen also displays the water temperature set point and the actual measured water temperature.
The Spa set point can be raised or lowered using the UP and DOWN arrows while this screen is displayed.
The display will automatically return to this screen after 15 seconds of push button inactivity when the
Spa set point is active.
3.
Heat or Cool Mode Selection Screen
–
This screen is only shown on Auto Heat and Cool Heat
pumps, not on heat only units.
On these units this screen allows the operator to switch the heat pump
between heat-only, cool-only and auto heat/cool modes.
4.
Heat Pump Timer Screen –
This feature is an adjustable timer to allow the heat pump to run (Green
LED ON) and then turn OFF (Green LED OFF) for a predetermined amount of time.
5.
Relay Remote On/Off Screen
– Allows the operator to turn the Relay Remote mode On and Off. In Relay
Remote mode, the heat pump is started and stopped by remote relays in an automation controller. The local
Pool and Spa set points are still active in this Relay Remote mode.
HEATPUMP RUNTIME
REMAINING = NONE
RELAY REMOTE
ON/OFF