Pentair PROSTOP-E, Installation And Operation Manual

Page: 39 / 46

39
HYP1100 (04-08-21)
Applies to both Ch. 1 & 2
Configuration English Metric
Speed Source Remote Remote
Speed Cal (inches/cm) 0.189 0.48
Alarm Minimum Speed (mph/km/h) 0.0 0.0
Area Units Acres Hectares
MTSI Width Source Disabled Disabled
Quick Start Speed (mph/km/h) Blank (0.0) Blank (0.0)
Quick Start Time (seconds) Blank ( 0 ) Blank ( 0 )
Test Speed (mph/km/h) 5.0 8.0
Implement Switch Polarity (Run = ) Open Open
Implement Switch External Source Local (None) Local (None)
Automatically attach Task Controller Disabled Disabled
Enable Section Control Enabled Enabled
Hitch to Reference (In./mm) Forward/Backward 0.0 0.0
Hitch to Reference (In./mm) Right/Left 0.0 0.0
Hitch Type Unknown Unknown
Configurations HYPRO PROSTOP-E HYPRO PROSTOP-E
Settings / Configuration Lock Unlocked Unlocked
Factory Configuration Locked Locked
Channel 1 Channel 2
Operation English Metric English Metric
Product Name Product 1 Product 1 Product 2 Product 2
Enable channel Enabled Enabled Disabled Disabled
Material / Units Liquid / Gallon Liquid / Liter Liquid / Gallon Liquid / Liter
Nozzle Number 01 01 01 01
1 Nozzle @ 40 PSI (GPM or L/min) 0.100 (GPM) 0.390 (L/min) 0.100 (GPM) 0.390 (L/min)
Target Rate (oz/acre / ml/ha, etc) 20 100 20 100
Rate Step (oz/acre / ml/ha, etc) 1 10 1 10
Application Mode Normal Normal Injection Injection
Control
Control Speed -1 -1 -1 -1
Automatic Delay Time (S) 1 1 1 1
Fixed Minimum Flow 0.00 0.00 0.00 0.00
Minimum Pressure (PSI/Bar) 15 1.00 15 1.00
Enable Manual Control Enabled Enabled Enabled Enabled
Enable Pressure Control Disabled Disabled Disabled Disabled
Enable Hybrid Control Disabled Disabled Disabled Disabled
Enable Quick Start Disabled Disabled Disabled Disabled
RATE CONTROLLER DEFAULT SETTINGS