background image

IMPORTANT
Please attach your sales invoice/docket here as proof of purchase should 

warranty service be required.
Please do not return Warranty Form to Pentair Australia - 

please retain for your records. 

Purchased From ...................................................................................................................
Purchase Date.....................................  Serial No..............................  Model No...................

L300260  0616

1-21 Monash Drive, 

Dandenong South, Vic 3175

Australia 

 

 National Customer Service:   Phone:   1300 137 344  

    

 

 

Fax:   

1800 006 688

 National Dealer Locator:  

Phone:   1800 664 266

 Email:            

 

[email protected] 

 Web:              

 

www.pentairpool.com.au

New Zealand  

 National Customer Service:   Phone:   0800 654 112  

  

 

 

Fax:   

0800 806 642

 National Dealer Locator:  

Phone:   0800 664 269

 Email:           

 

[email protected] 

 Web:          

 

www.pentair.co.nz

International Australia/New Zealand        

    

 

 

Phone:    +61 3 9709 5800 

    

 

 

Fax:   

+61 3 9709 5888

© Information contained here-in remains the property of Pentair Pty Ltd. Any reproduction,display, 

publication, modification or distribution is strictly prohibited without the prior written permission of 

Pentair Pty Ltd. 

Disclaimer:  

 

Every endeavour has been made to publish the correct details in this owners manual.

No responsibility will be taken for errors, omissions or changes in product specifications.
Pentair reserves the right to change product specifications and products details.

All product images are for reference purposes only and may not represent actual 
and/or current   product.

P

ANTER

A

e v o l u t i o n

Genuine Onga Spare Parts Supplied By:

Freephone 0508 634 341

7 Monier Pl, Mt Wellington, Auckland 1060, New Zealand

Summary of Contents for ONGA Eco Select PANTERA evolution

















Reviews: