![Pentair Biffi ICON 2000 Instructions And Operating Manual Download Page 20](http://html1.mh-extra.com/html/pentair/biffi-icon-2000/biffi-icon-2000_instructions-and-operating-manual_1524512020.webp)
20
Biffi
ICON 2000
InstructIon and operatIng manual
The warning condition occurs when a variable
reaches a critical value and/or a maintenance
action is required, but the actuator control
functions are still available� The alarm
condition occurs when a variable is out of the
acceptable range and the actuator control
functions are not available�
The alarm and warning lists only contain
the present alarms and warnings� When the
fault condition disappears, the corresponding
alarm or warning disappears from the list�
A reset routine is provided to clear the
type of alarm/warning that are memorized
(over-torque, jammed valve, etc�)�
description of VariaBles and reports
torque
output torque in % of the nominal torque stated in the NAMEPLATE menu
motor speed
RPM of electrical motor
main voltage
voltage (V) and frequency (Hz) of mains
current
current (A) absorbed by the motor
temperature
temperature (°C), inside the electronic compartment
time
present time
date
present date
alarm
list of present alarms (see paragraph12�11, Diagnostic messages)
warning
list of present warnings (see paragraph 12�11, Diagnostic messages)
Ktemp
temperature factor
mot temp
temperature (°C) of the electrical motor
term temp
temperature (°C) inside the terminal board compartment
log status
data logger status (off, ready, in progress: E: event number - n° of memory cycle
or R: sample number - n° of memory cycle)
wireless report
Bluetooth™ interface status (ready, not ready)
node report
report of bus interface card (only present if the bus card is present)
(see the relevant instruction manual)
fDI report
report of fDI function (only present if the LonWorks bus card is present)
(see the relevant instruction manual)
base report
base card report
- card code
- manufacturing week and year
- electrical diagram, etc�
term report
terminal board card report
- card code
- manufacturing week and year
- electrical diagram, etc�
Ain/Aout report
Ain/Aout card report (only present if the card is present)
- card code
- manufacturing week and year
- electrical diagram, etc�