Page 14
3. System Size
This program step is used to set up the number of valves (1, 2, 3, or 4) in the system.
Use Up or Down buttons to adjust this value.
1.
Press the Extra Cycle button.
2.
4. Regeneration Type
This program step is used to set up the trigger type.
Use Up or Down buttons to adjust this value.
1.
Press the Extra Cycle button.
2.
5. Valve Type
This program step selects the valve type (2750, 2850, 2900s, 3150, 3900, Stager-Butterfly, or Stager-Notch Cam)
Use Up or Down buttons to adjust this value.
1.
Press the Extra Cycle button.
2.
6. Regenerant Flow
This program step selects the regenerant flow type (Downflow, Upflow, or Upflow Fill First)
Use Up or Down buttons to adjust this value.
1.
Press the Extra Cycle button.
2.
Master Programming Guide
CAUTION: Before entering Master Programming, please contact your local professional water dealer.
Summary of Contents for 3200NXT
