Pentair 3200NXT, Service Manual

Page: 17 / 36

Page 17
Master Programming Guide
13. Regeneration Time
This program step sets time of day for a delayed regeneration to occur, or regeneration day override.
Default U.S.:
02:00 AM
Default Metric: 02:00 HR
Use the Shift button to select the digit you want to modify. 1.
Use Up or Down buttons to adjust this value. 2.
Press the Extra Cycle button. 3.
14. Regeneration Cycle Steps
This program step programs the Regeneration Cycle step times 1 through 5. Please refer to the chart below for
regenerant flow default cycle steps and times.
15.
Auxiliary Relay Output
The next two displays are part of a series of settings used to program the optional relay output. The first setting
turns the output on/off during Regeneration only. The second turns the output on during Service only, every time a
set volume of water used has accumulated.
CAUTION: Before entering Master Programming, please contact your local professional water dealer.
Regenerant Flow Cycle 1 Time Cycle 2 Time Cycle 3 Time Cycle 4 Time Cycle 5 Time
Down Flow Back Wash
10
Minutes
Brine &
Slow Rinse
1 Hour
Rapid
Rinse
10
Minutes
Brine Tank Fill 12 Minutes Pause N/A
UF Brine Draw
Brine & Slow
Rinse
1 Hour Backwash
10
Minutes
Rapid
Rinse
10
Minutes
Brine Tank Fill 12 Minutes Pause N/A
UF Fill First
Brine Tank
Fill
12
Minutes
Brine
Making
1 Hour
Brine
& Slow
Rinse
1 Hour Back Wash 10 Minutes
Rapid
Rinse
10 Minutes