P/N 840259
2
Rev. C 7-29-05
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should be followed, including
the following:
READ AND FOLLOW ALL INSTRUCTIONS
1. WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely
supervised at all times.
2. Check your local building codes before installation to ensure the PG2000 is located at least 5 feet from the
pool, or the minimum distance from the pool that local codes require.
3. The electrical supply for this product must include a suitable rated switch or circuit breaker to open all
ungrounded supply conductors to comply with Section 422-20 of the National Electrical Code, ANSI/
NFPA 70-2002. The disconnection means must be readily accessible to pool and spa users, but installed
at least 5 feet (1.5m) from the pool or spa water.
WARNING
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION
This PG2000 must be installed by a licensed or certified electrician in accordance with the National Electrical
Code and all applicable local codes and ordinances. Improper installation will create an electrical hazard which
could result in death or serious injury to pool users, installers, or others, due to electrical shock, and may also
cause property damage.
Disconnect all power before starting the installation process to all associated pool equipment. Failure to do so may
lead to severe electrical shock, which can result in death or severe personal injury.
WARNING
Before installing this
FIBER
works
®
product, read and follow all warning notices and instructions accompanying this light
product. Failure to follow safety warnings and instructions can result in severe injury, death, or property damage. You are
going to be using a sophisticated device which requires knowledgeable handling in order to insure its optimum
performance.
Please do not touch anything until you have read and understood these instructions.
If you have any
questions, please call our service hotline, Monday through Friday, 7:30 a.m. to 4:30 p.m.:
(800) 831-7133.
WARNING
It is recommended that
FIBER
works
®
be installed by trained and certified
FIBER
works
®
dealers only. This installation
manual assumes that your PG2000 will be properly installed in full accordance with the instructions provided, the National
Electrical Code, and any local codes applicable for an electrical installation of this type.
SAVE THESE INSTRUCTIONS.
