Rev. C 7-29-05
19
P/N 840259
Ferrule Assembly
Installation Steps,
1. Cut all cables 14 in. above Sub-terrain Base.
3. Assemble comp. nut, grommet, and ferrule body.
5. Pull on ferrule to check tightness.
7. Snap disk into "ears".
2. Strip jackets from 0 to 2 in. above the base.
4. Securely tighten the ferrule assembly.
6. Select the correct "numbered" fiber disk.
Tools and Material Required:
√√√√√
Cable Cutters
√√√√√
Cable Stripper
√√√√√
Crescent Wrench
√√√√√
Hot Knife
√√√√√
Phillips Screwdriver
√√√√√
Cutting Shield
√√√√√
Electrical Tape
TAPE OVER THE END
OF THE BUNDLE
4 IN. OF FIBER
PAST "POSTS".
KEEP FINGERS
OFF "EARS"
as detailed in Sec. VIII A - D.
USE FERRULE "INSERT" IF
LESS THAN 425 FIBERS.
14 IN.
