Pentair Pool Products Nocchi Pressomat, Use And Maintenance Manual

Page: 10 / 27

24
- Line n. 2 PUMP N. 1 s.
With keys (16) or (17) it is possible to set the parameter to any value between 0 and 255 seconds
This indicates that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In this case the example is set for 60 seconds.
After selecting the parameter press the key (18) and the following message will appear:
+
-
ENTER
TIMING
PUMPS N.2 s.060
- Line n. 1 Timing
No parameter
- Line n. 2 PUMP N. 2 s.
With keys (16) or (17) it is possible to set the parameter to any value between 0 and 255 seconds
This indicates that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In this case the example is set to 40 seconds
After selecting the parameter press the key (18) and the following message will appear:
+
-
ENTER
TIMING
PUMPS N.3 s.060
- Line n. 1 Timing
No parameter
- Line n. 2 PUMPS N. 3 s.
With keys (16) or (17) it is possible to set the parameter to any value between 0 and 255 seconds
This indicates that the pump will be arrested XXX seconds after having reached the maximum pressure set.
In this case the example is set to 40 seconds.
After selecting the parameter press the key (18) and the following message will appear:
+ -
ENTER
TIMING
PUMPS N.4 s.060
- Line n. 1 Timing
No parameter
- Line n. 2 PUMPS N. 4 s.
With keys (16) or (17) it is possible to set the parameter to any value between 0 and 255
seconds
This indicates that the pump will be stopped XXX seconds after having reached the maximum pressure set.
In this case the example is set to 30 seconds.
After selecting the parameter press the key (18) and the following message will appear:
+
-
ENTER
SERIALE ATT. NO
- Line n. 1 SERIAL ATT
With keys (16) or (17) it is possible to set the parameter YES or NO
+ -
GB