PENTAGRAM Cerberus [P 6361]
WDS Settings
WDS (Wireless Distribution System) is used to expand wireless coverage area. This Router
provides three modes:
Lazy
,
Bridge
and
Repeater
.
Lazy Mode
: In this mode, the connected device can be Bridge mode or Repeater mode and
enter the Router’s BSSID to establish the connection.
Bridge Mode
: In this mode router can only communicate with other WDS APs. In this mode,
you need to add the Wireless MAC address of the connecting device into the Router's AP MAC
address table or select one from the scanning table.
Repeater Mode
: In this mode, add the opposing MAC address into each own AP MAC address
table by manual or scanner to enlarge and extend the wireless radio.
Encrypt Type
: Select one from WEP, TKIP, AES for security here.
Pass phrase
: Enter the encrypted key for wireless devices.
AP MAC
: Input the MAC address of another (opposing) wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep the same bandwidth, channel
number, and security settings. Apply the settings and reboot the Router to activate it.
33