PENTAGRAM Cerberus [P 6361]
Security Settings
Client Filter Settings
To benefit your further management to the computers in the LAN, you can control some
ports access to Internet by data packet filter function.
Client Filter
: Check to enable client filter.
Access Policy
: Select one number from the drop-down menu.
Enable
: Check to enable the access policy.
Delete the Policy
: Click
Clear
button to clear all settings for the policy.
Filter Mode
: Click one radio button to enable or disable to access the Internet.
Policy Name
: Enter a name for the access policy selected.
IP Start/End
: Enter the starting/ending IP address.
Port No
: Enter the port range based over the protocol for access policy.
Protocol
: Select one protocol (TCP/UDP/Both) from the drop-down menu.
Times
: Select the time range of client filter.
Date
: Select the day(s) to run the access policy.
39