PENTAGRAM Cerberus [P 6361]
DMZ Settings
The DMZ function is to allow one computer in LAN to be exposed to the Internet for a
special-purpose service as Internet gaming or videoconferencing.
DMZ Host IP Address
: The IP address of the computer you want to expose.
Enable
: Click the checkbox to enable the DMZ host.
For example: Set the computer at IP address of 192.168.0.10 as DMZ host to connect
another host in the Internet for intercommunication.
NOTE:
When the DMZ host is enabled, the firewall settings of the DMZ host will not
function.
UPNP Settings
It supports latest Universal Plug and Play. This function goes into effect on Windows XP or
Windows ME or this function would go into effect if you have installed software that
supports UPnP. With the UPnP function, host in LAN can request the router to process some
special port switching so as to enable host outside to visit the resources in the internal host.
Enable UPnP
: Click the checkbox to enable the UPnP.
37